| 3.5 Gallon Wide Mouth Sprayers|
SP Systems Sprayer 02-SP35-WC
Get the job and clean-up done even faster with the SP35WC Wide Mouth sprayer. Our new sprayer design has a tank opening that is a full 4.5" in diameter that allows fast, safe pouring and easy cleaning. A special fiberglass reinforced lid adds strength. Add that to a longer hose and a wand, and you've got a great new way to get the job done better.
The SP35WC can spray continuously for 10 minutes after a single pumping session. The 12" pump tube builds pressure faster, with fewer strokes.
Our high-density polyethylene tank with UV inhibitors is more durable than steel. The tank is marked in gallons for accurate measuring. An extra-long 59" chemical resistant hose drains from the bottom of the tank, enabling the tank to be completely emptied and eliminating the need for a siphon tube.
An industrial spray pistol with all brass/stainless steel parts and spray lock position lets the user release the trigger while spraying.
Heavy duty, extra-long 26" brass wand resists corrosion.
Seals and O-rings made of exclusive Viton and H3 formulation that resists chemical attack.
Also, there is a convenient wand storage clip on the handle.
SP Systems Product #SP-20A
4.5" tank opening
The SP10A and SP20A Acid Sprayers are the first industrial sprayers expressly designed for acids - using new acid-resistant plastic and rubber compounds, plastic parts, and a PVC wand.
We have built a sprayer that is not affected by muriatic (hydrochloric) acid, hydrofluoric acid, or phosphoric acids. That means it can be used over and over for jobs like staining or etching concrete and masonry, dissolving rust or scale on metal surfaces, cleaning, degreasing, and more.
As an extra safety measure, the sprayer comes standard with a pressure relief valve that activates at 42 psi to prevent overpressurization and to hand-release any pressure remaining in the tank after use.
The SP Acid Sprayers feature the best-engineered pumping system available, spraying continuously for 10 minutes after a single pumping session. The 12" pump tube builds pressure faster with fewer strokes.
The high-density polyethylene tanks with UV inhibitors are more durable than steel. The units also feature an industrial spray pistol with a spray lock position to allow the user to release the trigger while spraying.
The hose drains from the bottom of the tank, allowing the contents to be completely emptied and eliminating the need for a siphon hose.
| "Yardtender 20" Sprayers|
SP Systems Product #02-YT202-1
20 Gallon Sprayer
'Pump'n'Go™' Sprays continuously for 10 minutes after 1 pumping session
With the YardTender Pump'n'Go™ sprayer, a single pumping session of 40 full strokes provides enough pressure to spray continuously for 10 minutes - enough to completely empty the YardTender 20 with just two pumping sessions.
This is not a "throw-away" sprayer, but a versatile home tool that will provide years of service in home and garden projects ranging from sealing and cleaning decks, fences, shake roofs, aluminum siding, concrete, brick, and stone, to wallpaper removal, carpet cleaning, waterproofing and fabric treatments, as well as applying fertilizers, herbicides, insecticides, oil-based sealers, diesel, pesticides, and other liquid solutions like chlorine.
| Plastic Spray Tip Set|
SP Systems Sprayer Product #Kit 25JT
Spray nozzles produce different spray patterns and coverage ratios. Adjustable nozzles (in brass or plastic) adjust from spray cone to a single stream
| 100 Mesh Sprayer Strainer Kit|
SP Systems Sprayer Product #KIT 27A
Wand, Adjustable Nozzle & Spray Pistol Kit
SP Systems Sprayers Product #KIT300
| 20" Brass Wand Kit|
SP Systems Sprayer Product #KIT 22
| Adjustable Nozzle Kit|
SP Systems Sprayers Product #KIT 25
Spray nozzles produce different spray patterns and coverage ratios. Adjustable nozzles (in brass or plastic) adjust from spray cone to a single stream.
| Solo Backpack Sprayer Hose|
Solo Part #0064234
Fits models 425/435/475/485
Solo Hand Held Sprayer Hose
Solo Part #4900515
Sprayer hose for 454, 456, 457
| Solo 20" Brass Spray Wand|
Solo Part 4900421
| Solo Tank Cap with valve assembly|
(Fits models 425/435/475/485)
Solo Wide Angle Flat Red Replacement Nozzle
Solo Part #4074386
- 100 Degrees
| Conversion Kit (converts 425 to 475)|
Solo Part #4900310N
| Solo Pressure Relief Valve |
Solo Part #4800-185
(Fits models 454,456,457)
| Solo Elbow Nozzle Assembly|
Solo Part #4900258N
Solo Part #4800170-P
| SoloPiston, Rod & Collar Kit |
Solo Part #0610409-K
Includes: Connecting rods (4074409, 4074408); lever (4074262); piston (4073558); and viton collar (4400189).
Solo Wide Angle Flat Yellow Replacment Nozzle
Solo Part #4074385
- 100 Degree
| Solo Pump Piston (Models 425,435)|
Solo Part #4073558P
| Solo 20" Spray Wand|
Solo Part #4900230-P
| Solo Sprayer Nozzles|
Solo Part #0610408-P
Includes sprayer elbow and the following assortment of nozzles and o-rings: 2700316 No-Drip Check Valve; 4074263 Flat Spray Nozzle; 0062106 and 0062115 O-Rings; 4074755 Jet Stream Nozzle; 4074756 Swirl Plate; 4074514 No-Drift Nozzle; 4074148 Screw Cap; 4074527 Plastic Adjustable Nozzle; and 4074283 Filter.
| Solo Viton Collar (Models 425,435)|
Solo Part #4400189-P
| Solo Pressure Gauge for Spray Wand|
Solo Part #4900622
| Solo Wand & Shut-off Valve Repair Kit Includes: |
O-rings (0062258 x 2, 0062106, 0062115, 0062271, 0062248, 0062212);
screw caps (4074148, 4074337);
pressure spring (0070259);
valve body (4074988);
and retaining nut (4074336)
| Brass Adjustable Spray Nozzle|
Solo Part #4900207
| Brass Adjustable Nozzle Kit w/cap and O-Ring|
Solo Part #0610410-P
For a full range of sprays - from a fine mist to a jet stream.
(Fits models 430-2G & 3G,456,457,Rollabout,425,475)
| Solo Flat Spray Nozzle |
Solo Part #4074263
- For Row treatment
- 120 Degrees
Solo Wide Angle Flat Brown Nozzle
Solo Part #4074514
- 110 Degrees
| Solo Nozzle Assortment|
Solo Part #0610456-P
4074263 Flat spray nozzle; 4074148 Screw Cap; 4074283 Filter; 4900252 Hollow Cone Nozzle 1.4mm; 4074514 No-Drift Nozzle 2.5; 4074386 No-Drift Nozzle 2.0; and 4900322 Hollow Cone Nozzle 1.8mm.